Features Current 10pA to 50mA Maximum potential range: ±5 V Compliance voltage: ±11 V Current range: ±50 mA USB powered 7 X 4.5 X 1 inch, ~300g 16Bit ADC Scan rate upto 80V/s Sensor study and low current applications Potentiostat,/Bipotentiostat Voltammetry Pulse techniques
Electrochemistry & AC ImpedanceContact Us for Inquiry
Features: Current – 10pA to 350mA, +/-0.0015%, Resolution 0.3f A Potential – +10V to -10V, +02V Scan Rate upto 5000V/s QCM frequency : 7.995MHz 1Hz = 1.34ng mass change Voltammetry cell Impedance : 10uHz to 10kHz EQCM cell Au crystal, 2 sided
Features: Current – 10pA to 350mA, +/-0.0015%, Resolution 0.3fA Potential – +10V to -10V, +0015% Scan Rate upto10,000V/s Impedance : 10uHz to 1MHz 1 million samples/sec Voltammetry, Pulse, AC Impedance, Galvanostatic chare-Discharge, RDE
Features: Current – 10pA to 350mA, +/-0.0015% Resolution 0.3fA Potential – +10V to -10V, +0015% Scan Rate upto 10,000V/s Impedance : 10uHz to 1MHz 1 million samples/sec Voltammetry, Pulse, AC Impedance, Galvanostatic chare-Discharge, RDE & RRDE, upgradeable to SECM
Features: Current – 10pA to 10mA, +/-0.0015%, Resolution 0.3fA Potential – +10V to -10V, +0015% Scan Rate 500V/s ECD for HPLC Amperometic i-t IR compensation 1 million samples/sec Voltammetry, Pulse, galvanostatic charge dischargeTechniques, RDE control
Features Bipotentistat SECM stepper motor XYZ 50mm steps 8nm XYZ piezo close loop steps of 1.6nm Current: 10pA to 350mA + 0.0015% Potential – +10V to -10V, +0.0015% Scan Rate upto 10,000V/s Impedance : 10uHz to 1MHz 1 million samples/sec Voltammetry, Pulse, AC Impedance, Galvanostatic chare-Discharge, RDE
Features Current – 10pA to 10mA, +/-0.0015% Resolution 0.3fA Potential – +10V to -10V, +0.001% Scan Rate 5000V/s Extremely sensitive system for doing sensor studies like Bio,electrochemical sensor etc. Voltammetry, Pulse techniques, Biosensor study Separate WE, RE, AE for 8 different cells or common RE & CE with 8 different modified WE
Features: Current – 10pA to 2A +/- 25V compliance Voltage Resolution 1pA Potential – +10V to -10V, +0015% Scan Rate 5000V/s Impedance : 10uHz to 10kHz High current measurements for batteries, fuel cells, large electrode area cells Voltammetry, Pulse, AC Impedance, Galvanostatic chare-Discharge, RDE Potentiostatic and Galvanostatic modes
Features 4 channel voltammetry and 4 channel amperometry simultaneous, user can activate required channels or all 8 channels Current – 10pA to 10mA, +/-0.0015%, Resolution 0.3fA Potential – +10V to -10V, +0.001% Scan Rate 5000V/s Voltammetry, Pulse techniques, Biosensor study Separate WE, RE, AE for 8 different cells or common RE & CE with 4 different modified WE
For making high density and high accuracy solution arrays Applications: 50 X 50mm, steps of 0.1um Stall load : 50N Speed 4mm/sec Orifice size of jetting device 60um Droplet Size 100-200picoliters Stepper motor controlled User friendly software Handy for SECM sample preparations with different droplet arrays